- About the company
- Delivery time
- Frequently asked questions
- Terms and Conditions
- Site Map
We present you with an engraved company sign, engraving made from a laminate of 1.6 mm or 3.2 mm thick.
1,6mm lub 3,2mm
Materiał:Podstawa: Laminat grawerski w kolorze złotym, srebrnym,czarnym oraz białym o grubości 1,6mm lub 3,2 mm.
Kolor laminatu grawerskiego:
Sprzedajemy również szyldy STANDARD. Więcej o produkcie możesz dowiedzieć się tutaj
3D Logo – all black
Logo will be created by using 3mm thick black acrylic.
3D Logo – black front
Logo will be created by using 3mm thick transparent acrylic. Front will be covered by weather-resistant black advertising foil.
3D Logo – coloured front
Logo will be created by using 3mm thick transparent acrylic. Front will be covered by weather-resistant coloured advertising foil.
Advertising foil colors may be slightly different than the colors of the logo from files sent in the attachments.
You can choose 1 montage option.
4 holes + 4 screws or 2 holes + 2 screws
We will make in plate 4 or 2 holes and we will add 4 or 2 chrome mounting screws. Pins for mounting are selected depending on the type of substrate. The hole diameter is 8 mm.
4 holes + 4 clamps
We will make in plate 4 holes. Such a finish will be perfect when you want to put plate for example to fence. We will add set of 4 UV-resistant black clamps. The holes can also be used for mounting plate using screws or other decorative pins. The hole diameter is 8 mm.
Mounting tapeOn the underside of plate you will find glued foam mounting tape. Very convenient solution that is well suited for mounting on smooth and medium-rough surfaces. The tape is also intended for outdoor use so you can safely install it on building. Just take off the protective film tape and stick the label to the previously clean and degreased surfaces.